XMW T5010 Series C-Band 10W BUCVSAT BUC

XMW T5010 Series C-Band 10W BUC

The XMW Model T Series C-band 10W BUC line covers the T5010, T5110, T5210, T5310, T5410 and T6010 block upconverters, each built around a specific input, local oscillator and output frequency arrangement. All models provide 10W (40 dBm) output power, 65 dB of gain with a +/-15 dB adjustment range in 1 dB steps, and phase noise of -73 dBc at 1 kHz. Operating from +24 VDC at 80 W, this C-band 10W BUC family suits efficient satellite uplink across fixed and remote VSAT terminals.

Key Features

  • 10W (40 dBm) C-band output power in an efficient outdoor block upconverter
  • 65 dB gain with a +/-15 dB adjustment range set in 1 dB increments
  • Phase noise of -73 dBc at 1 kHz across every model in the T Series
  • Six models covering standard and extended C-band uplink frequency plans
  • Low 80 W draw from a +24 VDC supply suits solar and battery-backed sites
  • Designed for reliable, efficient uplink in unattended remote installations

Technical Specifications

BandC-band
Product TypeBlock Upconverter (BUC)
ModelsT5010, T5110, T5210, T5310, T5410, T6010
Output Power10 W (40 dBm)
Input Frequency950-1825 MHz (model dependent)
Output Frequency5.725-7.025 GHz (model dependent)
LO Frequency4.705 / 4.775 / 4.900 / 5.775 GHz (model dependent)
Gain65 dB
Gain Adjustment+/-15 dB in 1 dB steps
Phase Noise-73 dBc at 1 kHz
Power Supply+24 VDC, 80 W

Typical Applications

  • Remote enterprise and branch office VSAT connectivity
  • Rural telephony and community broadband terminals
  • Maritime and inland waterway satellite terminals
  • Oil, gas, pipeline and mining site communications
  • Backup and disaster recovery links for critical networks
  • SCADA and telemetry backhaul from unmanned sites

T Series C-Band 10W BUC Models and Frequency Plans

The T Series splits into six models, each matched to a different part of the C-band uplink. The T5010 converts 950-1525 MHz to 5.850-6.425 GHz using a 4.900 GHz local oscillator, and the T5110 widens the input to 950-1750 MHz for 5.850-6.650 GHz on the same LO. The T5210 accepts 950-1825 MHz and transmits 5.850-6.725 GHz. The T5310 runs a 4.775 GHz LO for 5.725-6.525 GHz output from a 950-1750 MHz input, while the T5410 uses a 4.705 GHz LO with 975-1475 MHz in and 5.725-6.225 GHz out. For extended C-band, the T6010 converts 950-1250 MHz to 6.725-7.025 GHz on a 5.775 GHz LO.

Choosing a 10W C-Band BUC for a Remote VSAT Site

Ten watts is the workhorse power level for remote C-band terminals carrying moderate data rates on the fixed antenna sizes typically installed at such sites. The attraction is not only the smaller amplifier. Drawing 80 W from a +24 VDC supply, the T Series fits comfortably within the budget of a solar and battery installation, which matters at unmanned sites where mains power is unreliable or absent. Work the link budget before deciding: antenna gain, symbol rate, modulation and coding, target availability and the satellite operator's power limits together determine whether 10W provides adequate margin. If the calculation is tight before allowing for backoff and rain fade, move to a higher power class rather than running the amplifier close to saturation.

Installation and Integration Notes

Because the T Series runs on +24 VDC, confirm the modem or power injector can hold that voltage at the BUC under load once IFL cable loss is taken into account; long runs are the usual reason a nominally correct supply measures low at the amplifier. Weatherproof the outdoor connectors, fit a drip loop and bond the unit to the earth system. Use the 1 dB gain steps to set the transmit level your link budget specifies, keeping backoff from saturation whenever several carriers share the amplifier. Complete cross-polarisation and carrier line-up with the satellite operator before full-power operation. Finally, record the model, LO and gain setting for each terminal so a field replacement can be configured identically without a repeat line-up.

Why Buy XMW C-Band 10W BUCs from GCCSAT in the UAE

GCCSAT supplies XMW C-band BUCs to network operators, enterprises, energy companies and integrators across the UAE, the GCC and the wider Middle East. Since the T Series is divided into distinct frequency plans, ordering the correct model for your assigned transponder is as important as the power rating, and our engineers will confirm that with you before purchase. We support regional supply and documentation, terminal integration, and commissioning and line-up with the satellite operator. Pricing for the XMW C-band 10W BUC series is quoted on request. Tell us your antenna size, target satellite, required data rate and site power arrangement and we will prepare a suitable proposal.

Frequently Asked Questions

What is the output power of the XMW C-band 10W BUC?

All models in the T Series deliver 10W, equivalent to 40 dBm, of output power. As with any block upconverter, the level you actually run depends on how much backoff your waveform needs. Single-carrier operation can sit closer to the rating, whereas multicarrier transmission and high-order modulation require additional headroom to control intermodulation products.

What frequency ranges do the T5010 series models cover?

Coverage varies by model. Inputs across the series run from 950 MHz to 1825 MHz and outputs from 5.725 GHz to 7.025 GHz, with local oscillators at 4.705, 4.775, 4.900 or 5.775 GHz. The T6010, for example, converts a 950-1250 MHz input to 6.725-7.025 GHz output using a 5.775 GHz LO for extended C-band service.

What DC supply does the 10W C-band BUC need?

The T Series operates from +24 VDC and consumes 80 W. That relatively modest draw makes the family practical for solar-powered and battery-backed remote sites. Size the IFL and any power injector so the voltage measured at the BUC stays within specification while transmitting, not only when the terminal is idle.

How is the gain adjusted on the XMW C-band 10W BUC?

The series provides 65 dB of gain with a +/-15 dB adjustment range in 1 dB steps. That granularity lets an installer align the BUC to the modem's transmit output and the loss of the specific IFL run, so the terminal reaches its required transmit level without adding fixed attenuators or driving the modem output to an extreme.

Does GCCSAT support installation of XMW BUCs in the region?

Yes. GCCSAT is a UAE-based satellite communications integrator serving the GCC and wider Middle East. Beyond supply, we can assist with terminal integration, IFL and power design, on-site commissioning and satellite line-up. Contact our team with your site details and link requirements and we will advise on the right model and quote on request.

Enquire About XMW T5010 Series C-Band 10W BUC

Our sales team will provide pricing, availability, and shipping details.

Request a QuoteWhatsApp

More VSAT BUC

WhatsAppHow can I help you?