Actox 2W-300W Ku-Band Block Upconverter (BUC)VSAT BUC

Actox 2W-300W Ku-Band Block Upconverter (BUC)

The Actox Ku-Band Block Upconverter is a high-performance, compact device designed for satellite communication systems operating in the Ku-band frequency range, converting lower frequency signals from a modem to the higher frequencies used for transmission to the satellite. The range runs from the ABA2KX 2W Mini unit through to the ABD300KX at 300W. Robust construction, high reliability and efficiency suit both fixed and mobile satellite applications, and easy installation and maintenance make the Actox Ku-Band BUC a common choice for commercial and military networks alike.

Key Features

  • Twenty-two models from the ABA2KX 2W to the ABD300KX 300W cover the whole Ku-band range
  • Mini and Super Mini units suit flyaway and vehicle-mount antennas where mass is constrained
  • Robust construction and high reliability support both fixed and mobile deployments
  • Efficient operation supports stable, uninterrupted uplinks in challenging environments
  • Easy installation and maintenance reduce time on site during deployment and servicing
  • Proven across commercial and military satellite communication requirements

Technical Specifications

Product TypeKu-Band Block Upconverter (BUC)
BandExtended Ku-Band
Output Power Range2W to 300W
Mini ModelsABA2KX 2W Ext. Mini, ABA3GKX 3W Ext. Mini Full Ku-Band
Super Mini ModelsABA4SKX 4W, ABA5SKX 5W
ABE Series ModelsABE6KXH 6W, ABE7KXH 7W, ABE8KFX 8W, ABE10KFX 10W, ABE12KFX 12W, ABE16KX 16W, ABE20KX 20W, ABE25SKX 25W, ABE30SKX 30W
ABC Series ModelsABC40SKX 40W, ABC50SKX 50W, ABCN60KX 60W
ABD Series ModelsABD80KX 80W, ABD95KX 95W, ABD125KX 125W, ABD150KX 150W, ABD250KX 250W, ABD300KX 300W
ConstructionCompact, robust construction
InstallationFixed and mobile satellite applications
Typical MarketsCommercial and military satellite communications

Typical Applications

  • Maritime VSAT and offshore energy terminals on stabilised Ku-band antennas
  • Flyaway, backpack and vehicle-mount terminals for news gathering and event broadcast
  • Military and government communications on transportable and on-the-move platforms
  • Enterprise networks and cellular backhaul for remote sites across the Middle East and Africa
  • Mining, construction and remote camp connectivity beyond terrestrial reach
  • Disaster recovery and emergency communications requiring rapid terminal deployment

How the Actox Ku-Band BUC Fits Into a VSAT Terminal

The Actox Ku-Band Block Upconverter converts the lower frequency signal coming from a satellite modem into the higher Ku-band frequency required for transmission to the satellite, and amplifies it to the level the antenna needs. It mounts at the feed as a single outdoor unit, which is standard practice because it avoids running amplified Ku-band power through a long waveguide run and losing much of it to cable and connector loss. On the receive side an LNB performs the mirror-image job. Actox designs this family around robust construction, high reliability and efficiency, and states that it supports stable, reliable uplink transmissions with clear, uninterrupted communication even in challenging environments. That combination is exactly what a remote or unattended terminal needs, where a site visit to swap an amplifier is expensive and slow.

Mini, Super Mini and High-Power Actox Ku-Band BUC Models

The Actox Ku-band range is organised into families by power and physical size. At the compact end the ABA2KX offers 2W in a Mini package and the ABA3GKX offers 3W in a Mini Full Ku-band unit, while the ABA4SKX 4W and ABA5SKX 5W are Super Mini units built for the tightest mechanical envelopes. The ABE series covers the working middle ground from the ABE6KXH at 6W through 7W, 8W, 10W, 12W, 16W, 20W, 25W and 30W. The ABC series adds the ABC40SKX 40W, ABC50SKX 50W and ABCN60KX 60W. High power sits in the ABD series, running from the ABD80KX at 80W through 95W, 125W, 150W and 250W to the ABD300KX at 300W for demanding hub and high-throughput uplinks.

Installation, Maintenance and Integration Notes

Actox highlights easy installation and maintenance as a design goal, which shows in how these units integrate into an existing terminal. Mount the BUC at the feed with the polarisation orientation your OMT requires, and carry its mass on the feed arm rather than loading the waveguide flange. Keep the intermediate-frequency coaxial run within the loss budget your modem's DC feed and reference will tolerate, and weatherproof every outdoor connector properly. Thermal clearance becomes more important as you move up into the ABD series, so avoid trapping the housing against a radome wall and keep direct solar loading off the heatsink where the mount allows. For mobile and maritime platforms, add shock and vibration isolation suited to the vehicle or vessel, and complete a full line-up with the satellite operator before going on air.

Why Buy Actox Ku-Band BUCs from GCCSAT in the UAE

GCCSAT supplies Actox Ku-band BUCs and complete satellite ground segment hardware from the UAE into the GCC, wider Middle East and Africa. Buying through a regional integrator means the amplifier, antenna, feed components and modem are specified as one system and supported by one engineering team, rather than sourced separately and reconciled on site. We can help you select between a Mini, Super Mini, ABE, ABC or ABD model once you share antenna diameter, target satellite, coverage point and throughput requirement, and review the mechanical and thermal aspects of your mount before you order. Our services extend to terminal integration, commissioning and cross-polarisation line-up, and spares planning across a deployed fleet. Model datasheets are available on request, and pricing for any configuration is quoted on request.

Frequently Asked Questions

What power levels does the Actox Ku-Band BUC range cover?

The range spans 2W to 300W across twenty-two published models. It starts with the ABA2KX at 2W and ABA3GKX at 3W, moves through Super Mini 4W and 5W units, the ABE series from 6W to 30W and the ABC series from 40W to 60W, and reaches the ABD series covering 80W, 95W, 125W, 150W, 250W and 300W.

What is the difference between the Mini and Super Mini Actox BUCs?

Both describe compact mechanical packages intended for antennas where size and mass are constrained. Actox lists the ABA2KX 2W and ABA3GKX 3W as Mini units, and the ABA4SKX 4W and ABA5SKX 5W as Super Mini units. These are the natural choice for flyaway, backpack and vehicle-mount terminals where every kilogram on the feed arm matters.

Is the Actox Ku-Band BUC suitable for military applications?

Actox states that this Ku-band BUC family is a preferred choice for various commercial and military satellite communication needs, citing robust construction, high reliability and suitability for both fixed and mobile applications. Any specific programme requirement for environmental qualification or security accreditation should be confirmed against the individual model datasheet during procurement.

How do I choose the right Actox Ku-band BUC power level?

Start with the link budget. Antenna aperture, the satellite EIRP and G/T over your coverage point, your modcod and symbol rate, and the rain-fade margin you must hold together determine the transmit power needed at the feed. Smaller antennas require more power for the same EIRP. Always add back-off headroom rather than sizing to saturated output.

Does GCCSAT supply Actox Ku-band BUCs across the Middle East?

Yes. GCCSAT is a UAE-based satellite communications integrator supplying Actox Ku-band BUCs into the UAE, Saudi Arabia, Oman, Qatar, Kuwait, Bahrain and the wider Middle East and Africa region. Contact us with your antenna size, target satellite and throughput requirement and our team will recommend a suitable model from the range and quote it on request.

Enquire About Actox 2W-300W Ku-Band Block Upconverter (BUC)

Our sales team will provide pricing, availability, and shipping details.

Request a QuoteWhatsApp

More VSAT BUC

WhatsAppHow can I help you?