XMW T1350 / T1450 Ku-Band 50W BUCVSAT BUC

XMW T1350 / T1450 Ku-Band 50W BUC

The XMW T1350 and T1450 are 50 W (47 dBm) Ku-band block upconverters for demanding satellite communication terminals. The T1350 converts a 950-1700 MHz L-band input to 13.75-14.50 GHz using a 12.80 GHz local oscillator; the T1450 converts 950-1450 MHz to 14.00-14.50 GHz using a 13.05 GHz LO. Both provide 73 dB of gain with plus or minus 15 dB of adjustment in 1 dB steps, -73 dBc phase noise at 1 kHz and operate from +48 VDC at 380 W, making the T1350 and T1450 well suited to fixed and transportable Ku-band VSAT terminals.

Key Features

  • 50 W (47 dBm) Ku-band output power for high-demand VSAT terminals
  • T1350 covers 13.75-14.50 GHz; T1450 covers the 14.00-14.50 GHz uplink band
  • Wide 950-1700 MHz L-band input on the T1350 for extended IF band plans
  • 73 dB gain with +/-15 dB adjustment in 1 dB steps for precise level control
  • -73 dBc phase noise at 1 kHz for clean carriers and reliable modem lock
  • +48 VDC, 380 W operation keeps outdoor power distribution straightforward

Technical Specifications

ModelsT1350 and T1450
BandKu-band
Product TypeBlock Upconverter (BUC)
Input Frequency950-1700 MHz (T1350) / 950-1450 MHz (T1450)
LO Frequency12.80 GHz (T1350) / 13.05 GHz (T1450)
Output Frequency13.75-14.50 GHz (T1350) / 14.00-14.50 GHz (T1450)
Output Power50 W (47 dBm)
Gain73 dB with +/-15 dB adjustment in 1 dB steps
Phase Noise @ 1 kHz-73 dBc
DC Power+48 VDC, 380 W

Typical Applications

  • Enterprise and government VSAT remote terminals
  • Maritime and offshore energy connectivity
  • Broadcast contribution and regional news gathering
  • Remote mining and exploration camp networks
  • Disaster recovery and rapid deployment terminals
  • Cellular backhaul and rural broadband gateways

The Role of a 50W Ku-Band Block Upconverter

In a Ku-band VSAT terminal, the block upconverter takes the modem's L-band output, translates it to the transmit band and amplifies it at the antenna feed. The T1350 does this from 950-1700 MHz to 13.75-14.50 GHz with a 12.80 GHz local oscillator, and the T1450 from 950-1450 MHz to 14.00-14.50 GHz with a 13.05 GHz LO. Both deliver 50 W, or 47 dBm. That power class is a frequent choice for terminals that carry serious traffic but sit on moderate antennas, where the extra weight, bulk and power draw of an 80 W or 100 W amplifier is not justified. Keeping the amplification at the feed also means the run from the equipment room carries only L-band, which is far more forgiving over cable.

Matching the T1350 or T1450 to Your Link Budget

Choosing between models is a frequency decision: the T1350 for networks using the extended 13.75-14.50 GHz uplink with a 950-1700 MHz IF, the T1450 for services in the conventional 14.00-14.50 GHz band on a 950-1450 MHz IF. Choosing the power class is a link budget decision. Work from the antenna aperture, the required data rate, the modulation and coding scheme, the number of carriers and the availability target for your region. In the Gulf, rain fade at Ku-band is less punishing than in tropical zones but still needs a realistic margin, particularly for services with a contractual availability figure. If several carriers share the amplifier, allow proper back-off from the 50 W saturated rating.

Installation, Power and Maintenance Considerations

The T1350 and T1450 run from +48 VDC and draw up to 380 W, so specify the supply, cabling and protection for that continuous load and allow for voltage drop across the run to the antenna. Mount the BUC where heat can dissipate freely and where a technician can reach the connectors without dismantling the feed. Verify that, after interfacility cable loss, the modem's drive level puts the BUC at the intended operating point within its 73 dB gain and plus or minus 15 dB adjustment. Inspect the waveguide flange gasket at installation and at each service visit, since a degraded joint quietly wastes transmit power. Seal all outdoor connectors against moisture, and record the commissioned gain setting for the site.

Why Buy the XMW 50W Ku-Band BUC from GCCSAT in the UAE

GCCSAT is a UAE-based satellite communications integrator supplying XMW BUCs and full VSAT outdoor unit chains across the Emirates, the GCC and the wider Middle East. We can review your requirement and confirm whether the T1350 or T1450 is the right frequency and power match, then supply the surrounding antenna, feed, waveguide and modem so the terminal behaves as a system. Our services include specification review, system design, installation support, commissioning and regional after-sales technical assistance, and we can provide the manufacturer datasheet for independent verification by your engineering team. Share your satellite, band plan and carrier profile with us, and pricing for the XMW 50 W Ku-band BUC will be quoted on request.

Frequently Asked Questions

What is the difference between the XMW T1350 and T1450?

Both are 50 W (47 dBm) Ku-band BUCs with 73 dB of gain and -73 dBc phase noise at 1 kHz, and both run from +48 VDC at 380 W. The difference is frequency: the T1350 converts a 950-1700 MHz input to 13.75-14.50 GHz with a 12.80 GHz LO, while the T1450 converts 950-1450 MHz to 14.00-14.50 GHz with a 13.05 GHz LO.

What power supply does the 50W Ku-band BUC require?

The T1350 and T1450 operate from +48 VDC and consume up to 380 W. Size the DC supply, cable cross-section and protection devices for that continuous draw, with allowance for voltage drop over the cable run to a mast, roof or deck-mounted antenna. On generator-fed remote sites and vessels, confirm the platform can carry the load alongside the rest of the terminal.

How much gain adjustment do these BUCs offer?

Gain is specified at 73 dB with plus or minus 15 dB of adjustment in 1 dB steps on both models. That range lets an installer compensate for interfacility cable loss, set carrier levels precisely at commissioning, and repeat the same configuration across a fleet of terminals without fitting fixed attenuator pads at the feed, which simplifies both rollout and later fault-finding.

Can a 50W BUC carry multiple carriers?

It can, but not at the full saturated rating. When several carriers share one amplifier, the unit must be operated with back-off so that intermodulation products stay within the levels your satellite operator permits. That means the usable power per carrier is significantly below 50 W. Size the BUC from a multi-carrier link budget rather than from the single-carrier headline figure.

Does GCCSAT supply the T1350 and T1450 in the UAE and GCC?

Yes. GCCSAT supplies XMW Ku-band BUCs across the UAE, the GCC and the wider Middle East, along with the antennas, feeds, LNBs and modems that complete a terminal. Our engineers can support specification, integration, installation and commissioning in the region. Contact us with your terminal and application details and we will confirm the correct model for your uplink plan.

Enquire About XMW T1350 / T1450 Ku-Band 50W BUC

Our sales team will provide pricing, availability, and shipping details.

Request a QuoteWhatsApp

More VSAT BUC

WhatsAppHow can I help you?