Times Microwave N-Type and F-Type Coaxial ConnectorsVSAT RF Components

Times Microwave N-Type and F-Type Coaxial Connectors

Times Microwave Systems N-Type and F-Type coaxial connectors terminate RG6, RG11, LMR400 and LMR600 cable in satellite, RF and antenna installations. The N-Type range spans all four cable types for outdoor, high-frequency and high-power runs, while the F-Type range serves RG6 and RG11 for television, satellite and broadband work. Engineered for precision and durability, these Times Microwave connectors deliver secure, weather-resistant terminations with low signal loss, and published drawings cover EZ-240, EZ-400 and EZ-600 series parts for accurate cable preparation on site.

Key Features

  • N-Type connectors available for RG6, RG11, LMR400 and LMR600 coaxial cable assemblies
  • F-Type connectors for RG6 and RG11 in TV, satellite and broadband installations
  • Weather-resistant RG6 N-Type terminations suited to outdoor, high-frequency runs
  • RG11 N-Type parts add enhanced shielding for long-distance, high-frequency cable runs
  • LMR600 terminations deliver low-loss connections for high-power, long-distance RF links
  • Connector drawings published for EZ-240, EZ-400 and EZ-600 series part numbers
  • Engineered for precision and durability in residential and commercial communication systems

Technical Specifications

Product TypeCoaxial cable connectors (N-Type and F-Type)
N-Type Cable SupportRG6, RG11, LMR400, LMR600
F-Type Cable SupportRG6, RG11
RG6 N-TypeRobust, weather-resistant connection for outdoor, high-frequency applications
RG11 N-TypeEnhanced shielding for long-distance, high-frequency applications
LMR400 N-TypeSignal integrity for wireless communications, RF and antenna systems
LMR600 N-TypeLow-loss connection for high-power, long-distance RF applications
Published Connector DrawingsEZ-400-FM-75, EZ-600-FM-75-X, EZ-240-NMH-RA-X, EZ-400-NF-BH-X, EZ-240-SF-X, EZ-240-SM-X

Typical Applications

  • VSAT terminal RF interconnect between modem, BUC and LNB
  • Maritime and offshore energy communications installations
  • Broadcast, SNG and outside-broadcast antenna systems
  • Wireless and cellular backhaul antenna feeder terminations
  • CATV, satellite receive and broadband distribution networks
  • Government, defence and rapid-deployment field terminals

How Times Microwave Coaxial Connectors Fit Into a VSAT System

Every satellite terminal is eventually judged by its weakest connection. Between the modem, the L-band IFL run, the BUC and the LNB, a single VSAT installation can carry a dozen coaxial interfaces, and each one is an opportunity for moisture ingress, intermodulation or return-loss degradation. Times Microwave N-Type and F-Type connectors are the termination hardware for that chain, matched to RG6, RG11, LMR400 and LMR600 cable. N-Type parts handle the outdoor, high-frequency and high-power sections of the run: antenna feeds, transmit IFL, and the long pulls between an equipment room and the pedestal. F-Type parts serve the RG6 and RG11 side, where television, satellite receive and broadband distribution dominate. Matching the correct connector body to the correct cable is what keeps the RF budget honest from end to end.

Choosing Between N-Type and F-Type Coaxial Connectors

The decision is driven by the cable in hand and the environment it lives in. Times Microwave offers N-Type connectors across RG6, RG11, LMR400 and LMR600, which makes N-Type the default wherever signal integrity matters and the interface is exposed to weather. The RG6 N-Type option is built as a robust, weather-resistant connection for outdoor, high-frequency work; the RG11 version adds enhanced shielding for long-distance runs; the LMR400 variant targets wireless communications, RF and antenna systems; and the LMR600 variant is aimed at high-power, long-distance RF where low loss is the priority. F-Type is the familiar broadcast and broadband interface, offered here for RG6 and RG11, and is quick and secure to install. Where both would physically work, choose N-Type for outdoor and transmit paths.

Installation and Termination Notes

Termination quality is mostly discipline. Work from the published connector drawing for the exact part you are fitting, including EZ-400-FM-75, EZ-600-FM-75-X, EZ-240-NMH-RA-X, EZ-400-NF-BH-X, EZ-240-SF-X and EZ-240-SM-X, and use the preparation tools intended for that cable size rather than improvising with a knife. Keep the braid and foil undisturbed, seat the centre conductor fully, and confirm no stray whisker bridges the dielectric before the body is compressed. Outdoors, weatherproof every joint: self-amalgamating tape followed by an outer wrap, dressed so water runs away from the connector. Respect the cable's minimum bend radius at the transition, since a tight bend there is a classic cause of return-loss faults that only appear once the antenna is under wind load. Sweep the finished assembly before handover.

Why Buy Times Microwave Connectors from GCCSAT in the UAE

GCCSAT supplies RF interconnect hardware to integrators, broadcasters, offshore operators and government users across the UAE and the wider GCC. Working with a regional supplier means the connectors, the cable and the tooling arrive as one coherent package rather than three separate imports, and it means someone in your own time zone can confirm that the part number on your drawing is the part number in your hand. Our engineering team supports terminal integration and commissioning as well as component supply, so if these Times Microwave connectors are going into a VSAT build we can help specify the matching cable, weatherproofing approach and test regime around them. Datasheets and connector drawings are provided on request, and pricing is quoted on request against your cable types, quantities and configuration.

Frequently Asked Questions

Which cable types do Times Microwave N-Type connectors support?

Times Microwave offers N-Type connectors for RG6, RG11, LMR400 and LMR600 coaxial cable. The RG6 version provides a robust, weather-resistant connection for outdoor, high-frequency applications; RG11 adds enhanced shielding for long-distance, high-frequency runs; the LMR400 variant is tailored to wireless communications, RF and antenna systems; and the LMR600 variant delivers low-loss connections for high-power, long-distance RF applications.

What is the difference between an N-Type and an F-Type connector?

N-Type is a threaded, weather-resistant RF interface normally chosen for outdoor and high-frequency links such as antenna feeds and transmit paths. F-Type is the lighter connector familiar from television, satellite receive and broadband installations, valued for a secure and easy-to-install termination. Times Microwave supplies N-Type connectors for RG6, RG11, LMR400 and LMR600, and F-Type connectors for RG6 and RG11.

Can F-Type connectors be used on LMR400 or LMR600 cable?

Times Microwave lists its F-Type connectors for RG6 and RG11 cable, while its N-Type connectors cover RG6, RG11, LMR400 and LMR600. For LMR400 and LMR600 assemblies, specify the N-Type parts intended for those cable sizes. Always match the connector part number to the exact cable you are terminating and work from the published connector drawing for that part.

Which Times Microwave connector drawings are available?

Drawings published with this product include EZ-400-FM-75, EZ-600-FM-75-X, EZ-240-NMH-RA-X, EZ-400-NF-BH-X, EZ-240-SF-X and EZ-240-SM-X. Each drawing carries the mechanical detail for that specific connector body and cable size. GCCSAT can supply the relevant drawings with your quotation so your installation team can confirm preparation dimensions and tooling before any cable is cut.

Does GCCSAT supply Times Microwave connectors across the UAE and GCC?

Yes. GCCSAT is a UAE-based satellite communications integrator supplying RF components, coaxial cable and connectors to customers across the Emirates and the wider GCC and Middle East. We can quote connectors alongside matching Times Microwave cable and support the terminal integration around them.

Enquire About Times Microwave N-Type and F-Type Coaxial Connectors

Our sales team will provide pricing, availability, and shipping details.

Request a QuoteWhatsApp
WhatsAppHow can I help you?