Actox Bias-T DC Power Injector (ABT6AN, ABT6AON, ABT6ARS)VSAT RF Components

Actox Bias-T DC Power Injector (ABT6AN, ABT6AON, ABT6ARS)

The Actox Bias-T is a compact power injector that feeds DC to active outdoor units such as LNBs and BUCs through the RF coaxial cable, removing the need for a separate power run to the antenna. It delivers that power without affecting the RF signal passing through, which makes it a standard element of a reliable satellite communication setup. Actox publishes indoor power injector models ABT6AF and ABT6AN, outdoor models ABT6AON and ABT6AOF, and the ABT6ARS and ABT6ARSF bias tees with 10 MHz reference.

Key Features

  • Compact power injector for LNBs, BUCs and other active outdoor units
  • Delivers DC over the RF coaxial cable, avoiding a separate power run
  • Seamless power delivery without affecting the RF signal passing through
  • Indoor versions ABT6AF and ABT6AN for rack and equipment-room installation
  • Outdoor versions ABT6AON and ABT6AOF for antenna-side mounting
  • ABT6ARS and ABT6ARSF add a 10 MHz reference for outdoor unit stability
  • Essential building block for reliable satellite communication setups

Technical Specifications

Product TypeBias tee / DC power injector
FunctionSupplies DC power to active devices through the RF coaxial cable
Powered DevicesLNBs and BUCs
Signal ImpactPower delivery without affecting the RF signal
Indoor ModelsABT6AF, ABT6AN
Outdoor ModelsABT6AON, ABT6AOF
10 MHz Reference ModelsABT6ARS, ABT6ARSF
Form FactorCompact
Application AreaSatellite communication systems
BrandActox

Typical Applications

  • VSAT terminals powering an LNB or BUC over a single coaxial run
  • Maritime and offshore installations where antenna-side power runs are impractical
  • Broadcast, SNG and flyaway systems needing fast, minimal cabling
  • Government, defence and transportable communications shelters
  • Teleport and hub racks feeding outdoor units from indoor supplies
  • Disaster recovery and rapid-deployment terminals built for quick set-up

How the Actox Bias-T Powers an LNB or BUC Over Coax

Outdoor units need power, and running a separate supply cable up a mast or into a radome adds cost, weight, weatherproofing work and another thing to fail. A bias tee solves it by placing DC onto the coaxial cable that already carries the RF signal. Inside, the DC and RF paths are kept apart so the supply reaches the outdoor unit while the RF port facing the modem or receiver stays free of voltage. The Actox Bias-T is built for this role, supplying DC to active components such as LNBs and BUCs through the RF coaxial cable and doing so without affecting the signal in transit. One cable to the antenna means a faster installation and one less penetration to seal and maintain.

Indoor, Outdoor and 10 MHz Reference Versions Explained

Actox splits the range along the two questions that actually decide the part number. The first is where the unit will live. ABT6AF and ABT6AN are the indoor power injector versions for rack, cabinet or equipment-room mounting, while ABT6AON and ABT6AOF are the outdoor power injector versions intended for exposed positions near the antenna. The second question is whether the outdoor unit needs a frequency reference. ABT6ARS and ABT6ARSF are the bias tees supplied with a 10 MHz reference, which matters because many BUCs and LNBs lock to an indoor reference for frequency stability rather than relying on an internal oscillator. Settle mounting location and reference requirement first, then confirm the connector variant and electrical ratings on the relevant Actox datasheet.

Installation and Integration Notes for VSAT Terminals

Get the orientation right: the powered port faces the outdoor unit, and the blocked port faces the modem, receiver or test equipment that must not see DC. Where a modem can supply its own DC and reference, make sure only one source is enabled on that cable so supplies do not conflict. Account for voltage drop across long coaxial runs, since the figure that matters is the voltage at the outdoor unit and not at the injector. Outdoor installations need proper weatherproofing at every connector and sensible strain relief. Before energising, confirm that no DC is present on the RF-only port. Finally, label the powered cable clearly in the rack so future maintenance work does not connect sensitive equipment to a live line.

Why Buy Actox Bias Tees From GCCSAT in the UAE

GCCSAT supplies Actox RF products across the UAE, the GCC and the wider Middle East to satellite operators, maritime and offshore users, broadcasters, integrators and government customers. Because we also supply the antennas, BUCs, LNBs, modems and cabling a bias tee connects to, we can check that mounting location, reference handling and electrical ratings all agree before anything ships. Our team supports regional sourcing and logistics, integration and commissioning assistance, and follow-on supply for terminals already in service. Tell us whether the unit is indoor or outdoor, which outdoor unit it will feed and whether you need the 10 MHz reference version, and we will confirm the right Actox Bias-T model and issue pricing on request.

Frequently Asked Questions

What is an Actox Bias-T used for?

The Actox Bias-T supplies DC power to active components such as LNBs and BUCs through the RF coaxial cable, so the outdoor unit is powered from indoors instead of from a separate cable at the antenna. It delivers that power without affecting the RF signal, which makes it a standard part of a reliable satellite communication installation.

Which Actox bias tee model includes a 10 MHz reference?

The ABT6ARS and ABT6ARSF are the Actox bias tee versions supplied with a 10 MHz reference. Choose them when the connected BUC or LNB is designed to lock to an indoor reference for frequency stability rather than run from its own internal oscillator. Confirm the exact configuration on the Actox datasheet for the model you plan to deploy.

What is the difference between the indoor and outdoor Actox bias tees?

ABT6AF and ABT6AN are published as indoor power injectors, intended for rack, cabinet or equipment-room installation. ABT6AON and ABT6AOF are the outdoor power injector versions, intended for mounting in exposed positions closer to the antenna. Pick according to where the unit will physically sit, then confirm connector type and ratings against the relevant datasheet.

Can the Actox Bias-T power a BUC as well as an LNB?

Yes. Actox describes the Bias-T as designed to supply DC power to active components such as low-noise block downconverters and block upconverters through the RF coaxial cable. Because a BUC generally draws considerably more current than an LNB, verify the voltage and current ratings on the datasheet for your chosen model and allow for voltage drop along the coaxial run.

Does GCCSAT ship Actox bias tees across the UAE and GCC?

Yes. GCCSAT supplies Actox RF components including the Bias-T power injector range in the UAE, across the GCC and throughout the wider Middle East, with integration and commissioning support for new and existing VSAT terminals. Let us know your model preference, mounting location and reference requirement and we will confirm the configuration you need.

Enquire About Actox Bias-T DC Power Injector (ABT6AN, ABT6AON, ABT6ARS)

Our sales team will provide pricing, availability, and shipping details.

Request a QuoteWhatsApp
WhatsAppHow can I help you?