- Home
- Industries
Industries
Enabling transformation and progress across a wide range of industries globally, fostering innovation and growth in every sector.
Explore all → - Solutions
Connectivity
Connecting industries worldwide with reliable satellite internet solutions, driving innovation, efficiency, and growth across all sectors globally.
Explore all → - Services
Professional VSAT & IT Services
Delivering expert VSAT and IT solutions for seamless connectivity, reliability, and performance across all sectors.
Explore all → - Products
Superior Connectivity, Trusted Solutions
Offering premium Satcom products that guarantee reliable connectivity and boost innovation across industries.
Explore all → - Coverage
WorldWide Coverage
Delivering tailored satellite services that enhance connectivity, foster innovation, and support growth in every industry.
Explore all → - About
- Blog
- Contact
ELT Systems L-Band Active Combiner (2, 4, 8 and 16-Way)
ELT Systems L-Band Active Combiner (2, 4, 8 and 16-Way)
The ELT Systems Active Combiner merges multiple L-band RF signals into a single output with minimal loss, protecting signal integrity where several carriers or chains must share one path. It is available as a 2-way, 4-way, 8-way or 16-way unit, covering COM02L1A-2201, COM04L1A-2252, COM08L1A-2208 and COM16L1A-2223, with DC block on most models and one-port DC plus 10 MHz pass on the 4-way. Flexible and efficient in complex RF distribution networks, the Active Combiner supports commercial and military satellite systems in demanding operational environments.
Key Features
- Combines multiple L-band RF signals into one output with minimal loss
- Available as 2-way, 4-way, 8-way and 16-way units for scalable designs
- DC block models isolate each input from downstream supply voltage
- COM04L1A-2252 offers one-port DC plus 10 MHz reference pass
- Preserves signal integrity and strength across complex distribution networks
- Suited to both commercial and military satellite communication systems
- Built to handle demanding operational and environmental conditions
Technical Specifications
Typical Applications
- Teleport uplink chains combining several modem carriers into one HPA feed
- Maritime and offshore terminals aggregating multiple transmit paths
- Broadcast and SNG uplinks carrying several services on one antenna
- Government and defence hubs with multi-carrier transmit architectures
- Enterprise backhaul gateways consolidating traffic from modem pools
- Disaster recovery and rapid-deployment terminals sharing a single outdoor unit
How an Active L-Band Combiner Works in a Multi-Carrier Uplink
Where a splitter divides one signal into many, a combiner does the reverse: it accepts several inputs and presents them on one output, so multiple modems or transmit chains can share a single BUC, cable run and antenna. Passive combining costs level in the same way passive splitting does, and it also demands careful isolation so one transmitter does not push energy back into another. An active combiner compensates for the combining loss and helps maintain port-to-port isolation, keeping every carrier at a workable level. The ELT Systems Active Combiner is designed for this position in the chain, merging L-band signals with minimal loss and enhanced flexibility so multi-carrier uplinks stay clean and predictable in complex RF distribution networks.
Choosing Between 2-Way, 4-Way, 8-Way and 16-Way Models
Count the transmit chains you need to aggregate, then allow for growth, since a combiner sits at a busy point in the rack and swapping it later means touching every connected carrier. The ELT Systems range spans four sizes: COM02L1A-2201 for a simple pair, COM04L1A-2252 for four inputs, COM08L1A-2208 for eight and COM16L1A-2223 for sixteen, which covers everything from a small remote terminal to a substantial hub. Larger units usually make better sense than cascading smaller ones, because each additional stage adds another interface to align and another point of failure. Whichever size you settle on, confirm the exact rated frequency range and port count on the datasheet for the model you intend to deploy.
DC Block and 10 MHz Reference Handling on the Combiner
On the transmit side, discipline over DC is critical. A BUC typically takes supply and often a 10 MHz reference over the same coaxial cable, and if more than one modem attempts to feed that line the result ranges from confusing behaviour to hardware damage. The ELT Systems combiner range reflects this. The 2-way, 8-way and 16-way models are specified as DC block, isolating every input, while COM04L1A-2252 is offered as a one-port DC plus 10 MHz pass version so exactly one designated modem port supplies and references the outdoor unit. Decide during design which port owns that responsibility, configure the modems accordingly so only one enables its supply, and record the decision in the rack documentation for whoever maintains the site next.
Why Buy ELT Systems Active Combiners From GCCSAT in the UAE
GCCSAT supplies ELT Systems RF distribution equipment across the UAE, the GCC and the wider Middle East to teleports, maritime and offshore operators, broadcasters, integrators and government users. A combiner is a system decision rather than a shelf item: port count, DC routing and reference handling all have to agree with your modems, BUC and cabling. We work through that with you, recommend the right model, and support integration and commissioning once the hardware arrives. Our regional coverage handles sourcing and logistics into the Gulf, and we support repeat supply for networks already in service. Send us your carrier count and DC arrangement and we will confirm the correct ELT Systems Active Combiner and quote on request.
Frequently Asked Questions
What is the difference between an active combiner and an active splitter?
They are mirror images. A splitter takes one input and distributes it across several outputs, typically on the receive side so many demodulators can share a feed. A combiner takes several inputs and merges them onto one output, typically on the transmit side so several modems can share a BUC and antenna. ELT Systems offers both families in matching configurations.
How many inputs can the ELT Systems Active Combiner handle?
The published range covers 2-way, 4-way, 8-way and 16-way models: COM02L1A-2201, COM04L1A-2252, COM08L1A-2208 and COM16L1A-2223. Choose based on the number of transmit chains you need to aggregate today plus realistic expansion, since replacing a combiner in a live rack means disturbing every carrier connected to it.
Which ELT Systems combiner model passes DC and a 10 MHz reference?
COM04L1A-2252, the 4-way model, is specified as a one-port DC plus 10 MHz pass version, so a single designated input can carry supply and reference through to the outdoor unit. The 2-way, 8-way and 16-way models are DC block designs. Confirm the port assignment on the datasheet for your part number before wiring the rack.
Why does only one port carry DC to the BUC?
A BUC needs a single, well-defined source of supply and reference. If several modems all attempt to feed the same coaxial line through a combiner, supplies can conflict, references can compete and equipment can be damaged. Restricting DC to one designated port makes the power path unambiguous, which is why DC block is the default on the other combiner models.
Does GCCSAT supply ELT Systems combiners across the GCC?
Yes. GCCSAT supplies ELT Systems RF components including the L-band Active Combiner range in the UAE, throughout the GCC and across the wider Middle East, with support for integration and commissioning into new or existing VSAT hubs and terminals. Tell us your carrier count and DC requirement and we will confirm the model that fits your hub.
Enquire About ELT Systems L-Band Active Combiner (2, 4, 8 and 16-Way)
Our sales team will provide pricing, availability, and shipping details.
Request a QuoteWhatsAppMore VSAT RF Components
- XMW BPF-1219-400 L-Band Bandpass Filter
- XMW BPF-3423-36 C-Band Bandpass Filter
- XMW BPF-1000-30 L-Band Bandpass Filter
- XMW BPF-CX-CF-BW C-Band Bandpass Filter Series
- XMW BPF-CF-BW (BPF-C-1 to BPF-C-6) C-Band Bandpass Filters
- XMW BPF-7500-500 X-Band Bandpass Filter
- XMW BPF-11600-1800 Ku-Band Bandpass Filter
- Times Microwave N-Type and F-Type Coaxial Connectors
- Times Microwave LMR400, LMR600, RG6 and RG11 Coaxial Cables
- Norsat OMT-KUE Ku-Band Extended OMT Transmit Reject Filter
- Norsat C-Band Band Pass Filter (BPF)
- Nexgenwave Low Ku-Band Waveguide Rejection Filter
- Jupiter Microwave Flexible Waveguide (C-Band and Ku-Band)
- ELT Systems Passive Combiner-Splitter (L-Band and S-Band)
- ELT Systems TEEL1-4007 Bias Tee
- ELT Systems XX-435000 RF Attenuator (3, 6, 10 and 20 dB)
- ELT Systems L-Band and IF-Band Active Splitter (2 to 16-Way)
- Actox Bias-T DC Power Injector (ABT6AN, ABT6AON, ABT6ARS)
Product Categories
- VSAT BUC
- VSAT LNB
- VSAT Antennas
- VSAT Fixed Antennas
- VSAT Flyaway Antennas
- VSAT Maritime Antennas
- VSAT KingSat Antennas
- L-Band Satellite Terminals
- Cobham BGAN Terminals
- Thuraya L-Band Terminals
- VSAT Satellite Modems
- Satellite Phones
- Teltonika Products
- Sangfor Firewall & SD-WAN
- Thuraya Accessories
- Excelerate Hybrid Connectivity
- Peplink Products
- VSAT RF Components
- VSAT Hub & Test Equipment
- Remote Site Power Systems

