- Home
- Industries
Industries
Enabling transformation and progress across a wide range of industries globally, fostering innovation and growth in every sector.
Explore all → - Solutions
Connectivity
Connecting industries worldwide with reliable satellite internet solutions, driving innovation, efficiency, and growth across all sectors globally.
Explore all → - Services
Professional VSAT & IT Services
Delivering expert VSAT and IT solutions for seamless connectivity, reliability, and performance across all sectors.
Explore all → - Products
Superior Connectivity, Trusted Solutions
Offering premium Satcom products that guarantee reliable connectivity and boost innovation across industries.
Explore all → - Coverage
WorldWide Coverage
Delivering tailored satellite services that enhance connectivity, foster innovation, and support growth in every industry.
Explore all → - About
- Blog
- Contact
XMW BPF-1000-30 L-Band Bandpass Filter
XMW BPF-1000-30 L-Band Bandpass Filter
The XMW BPF-1000-30 is a narrowband L-band bandpass filter with a 985 to 1015 MHz passband and 30 MHz of bandwidth, designed to isolate a single narrow slice of a congested L-band IF. It delivers 15 dB rejection at CF±26 MHz and 30 dB at CF±37.5 MHz for 4 dB of in-band insertion loss, with 1 dB insertion loss quoted at 10 MHz. Supplied with N or F connectors, the BPF-1000-30 suits L-band signal processing where selectivity matters more than passband width.
Key Features
- Tight 30 MHz passband from 985 to 1015 MHz for narrowband L-band selection
- Steep response reaching 30 dB rejection only 37.5 MHz from centre frequency
- 15 dB rejection at CF±26 MHz protects against very close-in interference
- Choice of N or F connectors for straightforward integration into existing racks
- Passive construction with no power supply, tuning or routine maintenance needed
- Compact inline package suited to dense equipment racks and portable systems
Technical Specifications
Typical Applications
- Narrowband carrier isolation within a crowded L-band IF chain
- Beacon and reference receiver front-end protection at teleports
- Test, measurement and RF laboratory signal conditioning benches
- Government and defence satellite ground segment sub-systems
- Broadcast and SNG racks operating in high-RF-density environments
- System integration where a single narrow slice must be extracted
Where a Narrowband L-Band Bandpass Filter Earns Its Place
Most L-band filtering problems are solved with a wide block filter, but some are not. When the interfering signal sits only a few tens of megahertz from the wanted carrier, a wide filter simply passes both. The BPF-1000-30 answers that case with a 30 MHz passband from 985 to 1015 MHz and a response steep enough to reach 30 dB of rejection just 37.5 MHz from centre frequency. That selectivity is what you buy a narrowband filter for. It is typically used to protect a single receiver, beacon channel or measurement port where the input must contain one signal and nothing else, and where the rest of the L-band spectrum is genuinely unwanted rather than merely inconvenient.
Understanding the Insertion Loss Trade-Off
The BPF-1000-30 specifies 4 dB of in-band insertion loss, noticeably more than a wide block filter would present. That is not a shortcoming; it is physics. Narrow passbands with steep skirts require higher-order resonant structures, and every additional resonator contributes loss. The practical consequence is that this filter belongs after the low-noise amplifier rather than in front of it, where 4 dB of loss would add directly to system noise temperature. Placed at IF, after gain has already been applied, the same 4 dB is straightforward to recover with a downstream amplifier or by adjusting IF gain distribution. Plan the gain budget with the filter included from the start rather than adding it as an afterthought.
Installation and Commissioning Guidance
Fit the BPF-1000-30 immediately ahead of the equipment it protects, using short, well-terminated coaxial jumpers with the matching N or F connector type. Before inserting the filter into a live line, confirm how that line handles DC, because L-band feeds frequently carry LNB supply voltage and reference tone that a passive filter may not pass. Sweep the path with a spectrum analyser or vector network analyser before and after fitting so you can verify the passband is where you expect and quantify the improvement. Record both traces in the site file. On narrowband filters in particular, confirming the centre frequency on site is worthwhile, since a small offset between your carrier plan and the filter passband edge can cost real signal margin.
Buying XMW L-Band Filters from GCCSAT in the UAE
GCCSAT supplies XMW RF components across the UAE, the GCC and the wider Middle East, working with teleports, integrators, broadcasters and government end users. The BPF-1000-30 can be quoted alongside wider L-band filters, C-band and Ku-band waveguide filters and the rest of the XMW range, so that a project is specified as one consistent package. Our engineers can review your spectrum plots and advise whether a narrowband device such as the BPF-1000-30 is the right answer or whether a wider passband would serve you better. We support integration, installation and commissioning regionally, and pricing and datasheets are provided on request.
Frequently Asked Questions
What is the passband of the XMW BPF-1000-30?
The BPF-1000-30 passes 985 to 1015 MHz, giving 30 MHz of bandwidth centred within the lower part of the L-band range. It is a deliberately narrow filter intended to isolate one slice of spectrum, so it is best specified when you know the exact centre frequency of the signal you want to keep.
Why does the BPF-1000-30 have 4 dB of insertion loss?
Narrow passbands with steep skirts require more resonant sections, and each one contributes loss, so 4 dB is a normal consequence of the selectivity this filter provides. The practical implication is placement: fit the BPF-1000-30 after the low-noise amplifier, at IF, where the loss can be recovered by downstream gain rather than degrading system G/T.
How close to the passband can the BPF-1000-30 reject an interferer?
XMW specifies 15 dB of rejection at 26 MHz either side of centre frequency and 30 dB at 37.5 MHz either side. That is a steep response for L-band, which is what makes this filter useful against close-in interference. Measure your interferer's offset first and confirm the attenuation at that offset is sufficient for your link.
Which connectors does the BPF-1000-30 use?
The filter is available with N or F input and output connectors. Choose the type that matches your installed cable assemblies, because adapters introduce additional loss and reflection points that undermine the performance you are paying for. GCCSAT can confirm the connector configuration when quoting.
Does GCCSAT ship the BPF-1000-30 across the Middle East?
Yes. GCCSAT supplies XMW RF components including the BPF-1000-30 to customers throughout the UAE, the GCC and the wider Middle East, with engineering support for integration and commissioning. Contact our team with your frequency plan and application, and we will confirm the appropriate filter and provide a quotation on request.
Enquire About XMW BPF-1000-30 L-Band Bandpass Filter
Our sales team will provide pricing, availability, and shipping details.
Request a QuoteWhatsAppMore VSAT RF Components
- XMW BPF-1219-400 L-Band Bandpass Filter
- XMW BPF-3423-36 C-Band Bandpass Filter
- XMW BPF-CX-CF-BW C-Band Bandpass Filter Series
- XMW BPF-CF-BW (BPF-C-1 to BPF-C-6) C-Band Bandpass Filters
- XMW BPF-7500-500 X-Band Bandpass Filter
- XMW BPF-11600-1800 Ku-Band Bandpass Filter
- Times Microwave N-Type and F-Type Coaxial Connectors
- Times Microwave LMR400, LMR600, RG6 and RG11 Coaxial Cables
- Norsat OMT-KUE Ku-Band Extended OMT Transmit Reject Filter
- Norsat C-Band Band Pass Filter (BPF)
- Nexgenwave Low Ku-Band Waveguide Rejection Filter
- Jupiter Microwave Flexible Waveguide (C-Band and Ku-Band)
- ELT Systems Passive Combiner-Splitter (L-Band and S-Band)
- ELT Systems TEEL1-4007 Bias Tee
- ELT Systems XX-435000 RF Attenuator (3, 6, 10 and 20 dB)
- ELT Systems L-Band and IF-Band Active Splitter (2 to 16-Way)
- ELT Systems L-Band Active Combiner (2, 4, 8 and 16-Way)
- Actox Bias-T DC Power Injector (ABT6AN, ABT6AON, ABT6ARS)
Product Categories
- VSAT BUC
- VSAT LNB
- VSAT Antennas
- VSAT Fixed Antennas
- VSAT Flyaway Antennas
- VSAT Maritime Antennas
- VSAT KingSat Antennas
- L-Band Satellite Terminals
- Cobham BGAN Terminals
- Thuraya L-Band Terminals
- VSAT Satellite Modems
- Satellite Phones
- Teltonika Products
- Sangfor Firewall & SD-WAN
- Thuraya Accessories
- Excelerate Hybrid Connectivity
- Peplink Products
- VSAT RF Components
- VSAT Hub & Test Equipment
- Remote Site Power Systems

