Nisshinbo NJR2842 Universal Ku-Band 2LO PLL LNBVSAT LNB

Nisshinbo NJR2842 Universal Ku-Band 2LO PLL LNB

The Nisshinbo NJR2842 is a universal Ku-band 2LO PLL LNB that covers the full 10.7 to 12.75 GHz receive range using two switchable local oscillators. A 22 kHz tone on the IF cable selects between the 9.75 GHz low-band LO and the 10.6 GHz high-band LO, so one NJR2842 does the work of two fixed-LO units. With a 0.8 dB typical noise figure and a light 210 g F-type body, it suits VSAT terminals, teleport receive chains and broadcast downlink systems.

Key Features

  • Two selectable local oscillators cover the complete 10.7 to 12.75 GHz Ku-band receive range
  • LO switching by simple 22 kHz tone on/off, controlled from the modem or receiver
  • PLL local oscillator with internal reference held to ±50 ppm on the L-type variant
  • Low 0.8 dB typical noise figure supports small antennas and demanding link budgets
  • Compact, light housing at 210 g in the F-type version and 240 g in the N-type
  • Offered with F-type or N-type output to match existing IF cabling practice
  • RoHS compliant construction for international procurement requirements

Technical Specifications

Product TypeUniversal Ku-band 2LO PLL LNB (R2841 series)
RF Frequency10.7 to 11.7 GHz (low band) / 11.7 to 12.75 GHz (high band)
IF Frequency950 to 1,950 MHz (low band) / 1,100 to 2,150 MHz (high band)
Local Oscillator9.75 GHz (low band) / 10.6 GHz (high band)
LO Selection22 kHz tone on/off
LO Stability (L-type)Internal reference, ±50 ppm (±500 kHz typ.)
Noise Figure0.8 dB typ.
Output ConnectorF-type or N-type versions
Weight210 g (F-type) / 240 g (N-type)
ComplianceRoHS compliant

Typical Applications

  • Fixed and transportable Ku-band VSAT terminals
  • Teleport and hub receive chains
  • Broadcast and satellite news gathering downlinks
  • Maritime and offshore energy communications antennas
  • Enterprise and cellular backhaul earth stations
  • Government and disaster recovery deployable terminals

How the NJR2842 Universal Ku-Band LNB Works in a VSAT Terminal

An LNB sits at the focus of the antenna and does two jobs: it amplifies the very weak signal arriving from the satellite with as little added noise as possible, then converts it down to an L-band IF that ordinary coaxial cable can carry indoors. The NJR2842 handles the Ku-band receive spectrum in two halves. With the 9.75 GHz local oscillator selected, 10.7 to 11.7 GHz maps onto 950 to 1,950 MHz. Switch to the 10.6 GHz oscillator and 11.7 to 12.75 GHz maps onto 1,100 to 2,150 MHz. The modem or receiver simply asks for the band it needs, and the same physical feed keeps working as your service moves between transponders or you add a second carrier on a different sub-band.

22 kHz Tone Switching and When a Universal LNB Makes Sense

Tone switching is the reason universal LNBs became standard in Ku-band receive design. A 22 kHz signal superimposed on the IF coax tells the NJR2842 which oscillator to use, so band selection becomes a software decision made by the indoor unit rather than a trip up the mast. That matters when a terminal has to follow changing space segment, when one antenna serves several services, or when remote sites are expensive to visit. Before specifying, confirm that your modem or receiver can generate the tone and that any line amplifiers, splitters or fibre IF links in the path pass 22 kHz cleanly. Where the band never changes and the equipment cannot produce a tone, the mechanically switched NJR2841 is the simpler choice.

Installation and Integration Notes

Choose the connector variant first. The F-type NJR2842 weighs 210 g and matches most commercial IF cabling, while the N-type version weighs 240 g and is often preferred where a more robust weatherproof interface is wanted. Either way, the single coaxial run carries the L-band signal indoors and the DC supply plus the 22 kHz control tone outdoors, so cable loss, connector quality and weatherproofing all affect performance. Keep the run within the modem's supply and IF budget, weatherproof the outdoor connector properly, and support the cable so no strain reaches the LNB body. LO stability on the L-type variant is specified at ±50 ppm from the internal reference, which is worth checking against the acquisition range of your demodulator for narrow carriers.

Why Buy Nisshinbo Ku-Band LNBs from GCCSAT in the UAE

GCCSAT supplies satellite ground segment hardware from Dubai to customers across the UAE, the wider GCC and the Middle East, and the NJR2842 is part of the Ku-band receive line we support. Our engineers work with LNBs every day inside complete terminals, so we can help you match the LO scheme, connector type and stability grade to the modem, feed and antenna you already run, rather than shipping a part number and leaving you to find out. We can advise on IF cabling, tone compatibility and commissioning, and support integration into new or existing VSAT installations. Pricing and availability for the NJR2842 are quoted on request, and our team can also supply the R2841 series datasheet for design review.

Frequently Asked Questions

What frequency range does the Nisshinbo NJR2842 cover?

The NJR2842 covers 10.7 to 11.7 GHz in the low band and 11.7 to 12.75 GHz in the high band. The low band converts to a 950 to 1,950 MHz IF using a 9.75 GHz local oscillator, and the high band converts to 1,100 to 2,150 MHz using a 10.6 GHz local oscillator, giving continuous coverage of the Ku-band receive spectrum.

How do you switch bands on the NJR2842?

Band selection is done by 22 kHz tone on/off. The modem or receiver applies the tone on the IF coaxial cable to move the LNB between its 9.75 GHz and 10.6 GHz local oscillators, so no physical access to the antenna is required. Confirm that your indoor unit can generate the tone and that everything in the IF path passes it.

What is the difference between the NJR2842 and the NJR2841?

Both are universal Ku-band 2LO PLL LNBs from the same R2841 series with identical published frequency plans and a 0.8 dB typical noise figure. The difference is how the local oscillator is chosen: the NJR2842 selects it electronically by 22 kHz tone on and off, while the NJR2841 uses a mechanical switch set by hand during installation.

What noise figure does the NJR2842 achieve?

Nisshinbo specifies a typical noise figure of 0.8 dB for the NJR2842. Noise figure is the dominant contributor to system noise temperature in a receive chain, so a low value directly improves G/T and gives more link margin on smaller antennas or under rain fade conditions common in the Gulf.

Does GCCSAT supply the NJR2842 across the UAE and GCC?

Yes. GCCSAT is a UAE-based satellite communications integrator supplying Ku-band LNBs and related ground segment equipment throughout the Emirates, the GCC and the wider Middle East. We can also support integration, IF cabling design and terminal commissioning. Contact our team with your requirement and we will quote the NJR2842 on request.

Enquire About Nisshinbo NJR2842 Universal Ku-Band 2LO PLL LNB

Our sales team will provide pricing, availability, and shipping details.

Request a QuoteWhatsApp
WhatsAppHow can I help you?