Comtech CDM-760 Advanced High-Speed Trunking and Broadcast ModemVSAT Satellite Modems

Comtech CDM-760 Advanced High-Speed Trunking and Broadcast Modem

The Comtech CDM-760 Advanced High-Speed Trunking and Broadcast Modem is built for backbone links where spectral efficiency decides the business case. It covers symbol rates from 0.1 to 150 Msps and data rates from 0.1 to over 720 Mbps simplex or 1.4 Gbps duplex, and is configurable as a true DVB-S2 and DVB-S2X broadcast modulator, demodulator or full modem. DoubleTalk Carrier-in-Carrier compression, modulation up to 256APSK and support for HTS, GEO and MEO operation with hitless handover suit demanding teleport and broadcast networks.

Key Features

  • Ultra wide band symbol rates from 0.1 to 150 Msps for high-capacity carriers.
  • Data rates from 0.1 to over 720 Mbps simplex and over 1.4 Gbps duplex.
  • DVB-S2 and DVB-S2X compliant with DVB-S2-EB1 and EB2 Efficiency Boost technology.
  • DoubleTalk Carrier-in-Carrier bandwidth compression reduces occupied satellite spectrum.
  • Modulation from QPSK through to 256APSK with ACM and CCM operation.
  • Dual IF at 70/140 MHz plus L-Band and L-Band monitor as standard.
  • Supports HTS, GEO and MEO operation with hitless antenna and satellite handover.

Technical Specifications

Product TypeAdvanced high-speed trunking and broadcast modem
Symbol Rate0.1 to 150 Msps
Data Rate0.1 to >720 Mbps simplex; >1.4 Gbps duplex
ModulationQPSK, 8PSK, 16APSK, 32APSK, 64APSK, 128APSK, 256APSK
Standards ComplianceDVB-S2 ETSI EN 302 307 and DVB-S2X EN 302 307-2 compliant
Bandwidth CompressionDoubleTalk Carrier-in-Carrier
CodingACM and CCM; DVB-S2-EB1 and EB2 Efficiency Boost technology
Carrier IDEmbedded MetaCarrier DVB-CID ETSI TS 103 129
IF InterfacesDual IF 70/140 MHz, L-Band and L-Band monitor (standard)
Data InterfacesTwo Gigabit 10/100/1000Base-T standard; optical Gigabit optional
Packet Processing>600,000 pps simplex; 1.2M pps duplex
Management and RedundancyHTTP, SNMP, Telnet, RS-232/485, in-band M&C; 1:1 and 1:N redundancy available

Typical Applications

  • Teleport to teleport trunking and gateway backbone links
  • DVB-S2X broadcast contribution and content distribution
  • Cellular backhaul aggregation over satellite
  • HTS gateway and high-capacity forward-link infrastructure
  • Government, defence and national backbone communications
  • Carrier-grade capacity restoration and network resilience links

How the CDM-760 L-Band and 70/140 MHz Trunking Modem Is Used

The CDM-760 belongs at the top of an earth station, carrying aggregated traffic rather than serving individual remotes. It is configurable as a true DVB-S2 and DVB-S2X broadcast modulator, as a demodulator, or as a full modem, which lets one product type cover transmit-only broadcast head ends, receive sites and bidirectional trunks. Interfacing is flexible: dual IF at 70/140 MHz plus L-Band and an L-Band monitor output come as standard, so the modem drops into both legacy IF earth stations and modern L-Band block-converted RF chains. Two Gigabit 10/100/1000Base-T ports are standard on the data side, with an optical Gigabit interface available as an option, and PIIC cards add ASI, G.703 E3/T3/STS-1, STM-1 copper SDH and OC-3 SONET where legacy interfaces are still required.

Spectral Efficiency: Carrier-in-Carrier, Efficiency Boost and 256APSK

On a trunking link, transponder cost dwarfs equipment cost, so the CDM-760 concentrates on getting more traffic through less bandwidth. DoubleTalk Carrier-in-Carrier lets the forward and return carriers share the same spectrum, cutting occupied bandwidth on duplex links. DVB-S2-EB1 and EB2 Efficiency Boost technology adds further gain over baseline DVB-S2X performance, and the modulation range extends from QPSK all the way to 256APSK so a strong link can be pushed to very high spectral efficiency. ACM and CCM operation let operators choose between adapting continuously to conditions or holding a fixed, predictable carrier. Comtech also cites near theoretical performance with minimal implementation loss, which is the figure that ultimately decides how much of that theoretical efficiency reaches the transponder.

Packet Processing, Interfaces and Network Integration Notes

High symbol rates only help if the packet path keeps up. The CDM-760 processes more than 600,000 packets per second simplex and 1.2 million duplex, with GSE low-overhead operation rated at 190,000 pps simplex and over 350,000 pps duplex, and Layer 3 routed mode supporting up to 256 static routes at over 105,000 pps simplex and 150,000 pps duplex. Jumbo frame support to 9,000 bytes in packet processor mode helps on high-throughput terrestrial handoffs. Plan the earth station around these numbers: confirm the amplifier, upconverter and antenna support the carrier plan, provide conditioned power and cooling for continuous operation, and size the terrestrial switching to absorb the throughput. Management runs over HTTP, SNMP, Telnet and RS-232/485, with in-band over-satellite monitor and control, and 1:1 or 1:N redundancy switching is available.

Why Buy the Comtech CDM-760 from GCCSAT in the UAE

GCCSAT supplies Comtech high-speed trunking and broadcast modems, including the CDM-760, to teleport operators, broadcasters, telecom carriers, integrators and government users across the UAE, the GCC and the wider Middle East. Equipment at this level is bought as part of a carrier plan, so we support the surrounding engineering: matching the CDM-760 configuration and interface options to the existing RF chain, discussing Carrier-in-Carrier and MODCOD strategy against your transponder lease, and assisting with integration, redundancy design and commissioning at the earth station. Regional supply and logistics from the UAE simplify procurement for Gulf projects. Pricing for the CDM-760 is quoted on request, matched to configuration, interface options and project scope.

Frequently Asked Questions

What symbol and data rates does the Comtech CDM-760 support?

The CDM-760 covers symbol rates from 0.1 to 150 Msps and data rates from 0.1 to more than 720 Mbps in simplex, or over 1.4 Gbps in duplex operation. Comtech describes these as ultra wide band symbol rates achieved with near theoretical performance and minimal implementation loss. The rate achievable on any specific link naturally depends on the allocated bandwidth, the MODCOD selected and the available link margin.

Is the CDM-760 DVB-S2X compliant?

Yes. The CDM-760 is DVB-S2 ETSI EN 302 307 and DVB-S2X EN 302 307-2 compliant, and can be configured as a true DVB-S2 and S2X broadcast modulator, demodulator or full modem. It also supports DVB-S2-EB1 and EB2 Efficiency Boost technology and embedded MetaCarrier DVB-CID carrier identification to ETSI TS 103 129, which is increasingly required by satellite operators for interference resolution.

What is DoubleTalk Carrier-in-Carrier and why use it?

DoubleTalk Carrier-in-Carrier is Comtech's bandwidth compression technique that allows the outbound and inbound carriers of a duplex link to occupy the same satellite spectrum, with each end cancelling its own transmitted signal from the received composite. On a high-capacity trunking link this can substantially reduce occupied bandwidth, which translates directly into lower recurring space segment cost over the life of a transponder lease.

Which interfaces does the CDM-760 provide?

Dual IF at 70/140 MHz plus L-Band and an L-Band monitor output are standard on the RF side. On the data side, two Gigabit 10/100/1000Base-T interfaces are standard with an optical Gigabit interface optional. Optional PIIC cards add ASI, G.703 E3/T3/STS-1, STM-1 copper SDH and OC-3 SONET single or multi-mode 1300 nm. The modem is multistream capable through a multi-interface multiplexer.

Does GCCSAT supply and support the CDM-760 in the Middle East?

Yes. GCCSAT supplies the Comtech CDM-760 from the UAE to teleports, broadcasters, carriers and government users across the GCC and the wider Middle East, with engineering support for configuration, interface selection, redundancy design, integration and commissioning. Share your carrier plan, transponder details and interface requirements and our team will confirm the appropriate CDM-760 build, including interface card selection and redundancy options.

Enquire About Comtech CDM-760 Advanced High-Speed Trunking and Broadcast Modem

Our sales team will provide pricing, availability, and shipping details.

Request a QuoteWhatsApp
WhatsAppHow can I help you?