Sumeru 2.4 m Ku-Band Transmit-Receive Antenna SystemVSAT Fixed Antennas

Sumeru 2.4 m Ku-Band Transmit-Receive Antenna System

The Sumeru 2.4 m Ku-band antenna is a transmit-receive VSAT system designed and manufactured for enduring conditions. Its offset reflector is formed from two compression moulded thermoset petals, with a closely spaced rib structure behind the surface that adds strength under wind loading and holds the parabolic shape Ku-band service demands. The steel section mount is hot-dip galvanised for extreme environments and rigid enough to keep pointing accuracy inside a narrow Ku-band beamwidth. The 2.4 m Ku-band antenna meets applicable ITU recommendations.

Key Features

  • Two-petal compression moulded thermoset offset reflector with excellent Ku-band reflectivity.
  • Closely spaced rib structure behind the reflector adds strength under wind loading.
  • Ribbing also preserves the parabolic surface shape required for Ku-band performance.
  • Hot-dip galvanised steel section mount engineered for extreme environmental conditions.
  • Fine adjustment in both axes for precise satellite alignment during commissioning.
  • Hardware selected for improved environmental resistance across the whole assembly.
  • Meets applicable ITU recommendations; other frequency bands available on request.

Technical Specifications

BrandSumeru Microwave
Antenna TypeTransmit-receive VSAT antenna
Reflector Diameter2.4 m
BandKu-band
Reflector GeometryOffset
Reflector Construction2-petal, compression moulded thermoset
Rear StructureClosely spaced integral rib structure for wind loading
MountSteel section, hot-dip galvanised
AdjustmentFine adjustment in both axes
HardwareImproved environmental resistance
StandardsMeets applicable ITU recommendations
Datasheet2.4-M-Ku-BAND-ANTENNA-SYSTEM.pdf

Typical Applications

  • Enterprise VSAT backhaul and branch connectivity
  • Broadcast contribution and SNG base sites
  • Oil, gas and mining site communications
  • Government and public safety networks
  • Regional teleport and gateway extensions
  • Disaster recovery and emergency response links

The Sumeru 2.4 m Ku-Band Antenna at a Glance

The 2.4 m Ku-band antenna is Sumeru's mid-size transmit-receive offering: large enough to carry serious throughput and hold availability, small enough that a two-piece reflector, a modest foundation and a small crew can get it working. Sumeru moulds the offset reflector from thermoset composite in two petals and casts a closely spaced rib structure into the back of the surface. That ribbing does two jobs at once. It stiffens the dish against wind loading, and it holds the parabolic profile Ku-band service depends on. A hot-dip galvanised steel section mount carries the reflector, and fine adjustment in both axes lets an installer peak the link precisely before locking the assembly down.

Two-Petal Reflector Construction and Wind Loading

Reflector construction sounds like a detail until the antenna is on a mast in a shamal. A moulded thermoset surface does not corrode, dent or delaminate the way sheet metal can, and the two-petal split keeps the shipping crate manageable while leaving only one joint to align on site. The integral ribbing behind the surface is the more important feature. Wind pressure on a 2.4 m dish is substantial, and a reflector that deflects under gusts loses gain and wanders off the satellite. Sumeru's closely spaced ribs resist that deflection. When you specify the mount and foundation, work to the real gust figures for the site rather than an average: the reflector will hold its shape, but the structure underneath has to hold the reflector.

Site Selection and Ku-Band Pointing Accuracy

Ku-band beams are narrow, and a 2.4 m aperture narrows them further, so alignment and stability drive the outcome of the installation. Pick a site with clear line of sight to the satellite arc you will use, allowing headroom for a future satellite move. Avoid rooftops that flex, parapets that create turbulence and locations immediately downwind of large structures. Set the mount plumb, let the foundation cure fully, and use the antenna's fine adjustment in both axes to peak the receive signal before locking the assembly. Re-check alignment after the first month, then on a regular maintenance cycle. Cable and waveguide runs should be short, supported and weatherproofed with drip loops, with the whole structure bonded and earthed to local practice.

Why Integrators in the GCC Buy Ku-Band Antennas from GCCSAT

GCCSAT is a satellite communications integrator based in the United Arab Emirates, supplying VSAT antennas, RF electronics, modems and complete terminals across the GCC, the wider Middle East and Africa. When you buy the Sumeru 2.4 m Ku-band antenna from us, it is quoted alongside the BUC, LNB, feed and modem it has to work with, so the parts arrive matched rather than merely compatible. Our engineers can advise on mount and foundation selection for your site, prepare the commercial documentation your project needs, and support installation, alignment and commissioning. Pricing for Sumeru antennas is quoted on request; send us the site, band and quantity and we will respond with a formal quotation.

Frequently Asked Questions

How is the Sumeru 2.4 m reflector constructed?

It is a compression moulded thermoset offset reflector supplied in two petals. Behind the reflecting surface Sumeru moulds a closely spaced rib structure, which strengthens the dish against wind loading and helps it hold the parabolic shape required for Ku-band. The two-petal split keeps the reflector shippable and leaves a single joint to align during assembly on site.

What size antenna do I need for a Ku-band VSAT site?

It depends on the satellite, the beam your site sits in, the throughput you have contracted and the availability target you must hit. As a general rule, larger apertures buy gain, throughput and rain margin at the cost of wind loading, civil works and site preparation. A 2.4 m Ku-band antenna is a common choice for demanding enterprise, broadcast contribution and government sites. GCCSAT can review your link budget with you.

Is the 2.4 m antenna available in other frequency bands?

Yes. Sumeru states that other frequency bands are available on request, and GCCSAT also supplies the 2.4 m antenna in a C-band configuration. The mechanical design is closely related; the reflector surface, feed and RF chain are what change with the band. Decide the band from your contracted satellite capacity and the rain climate at the site.

Does the antenna comply with regulatory pattern requirements?

Sumeru states that the antenna meets applicable ITU recommendations. The product description we hold does not list specific national approvals or certification marks, and we do not claim any beyond that statement. If your regulator or satellite operator needs pattern data or compliance evidence for a licence application, ask GCCSAT and we will request the appropriate documentation from the manufacturer.

Can GCCSAT deliver Sumeru antennas outside the UAE?

Yes. GCCSAT supplies Sumeru antenna systems from the UAE across the GCC, the wider Middle East and Africa, and we handle the export documentation and logistics coordination that involves. We can also arrange installation, alignment and commissioning support. Tell us the destination, quantity and site details and our team will take the enquiry from there.

Enquire About Sumeru 2.4 m Ku-Band Transmit-Receive Antenna System

Our sales team will provide pricing, availability, and shipping details.

Request a QuoteWhatsApp

More VSAT Fixed Antennas

WhatsAppHow can I help you?