Sumeru 1.8 m Ku-Band Transmit-Receive Antenna SystemVSAT Fixed Antennas

Sumeru 1.8 m Ku-Band Transmit-Receive Antenna System

The Sumeru 1.8 m Ku-band antenna is a compact transmit-receive VSAT system designed and manufactured for enduring conditions. The offset reflector is compression moulded thermoset in a single piece, with a closely spaced rib structure behind the surface that adds strength under wind loading and keeps the parabolic shape Ku-band service requires. Sumeru specifies the surface for excellent Ku-band reflectivity and mounts it on hot-dip galvanised steel section, rigid enough for accurate pointing at Ku-band beamwidths. The 1.8 m Ku-band antenna meets applicable ITU recommendations.

Key Features

  • Single-piece compression moulded thermoset offset reflector with excellent Ku-band reflectivity.
  • Integral rib structure behind the reflector resists wind loading and surface distortion.
  • Compact 1.8 m aperture suits rooftops, compounds and space-constrained remote sites.
  • Hot-dip galvanised steel section mount built for extreme environmental conditions.
  • Fine adjustment in both axes simplifies peaking the link during commissioning.
  • Hardware throughout selected for improved environmental resistance.
  • Meets applicable ITU recommendations; other frequency bands available on request.

Technical Specifications

BrandSumeru Microwave
Antenna TypeTransmit-receive VSAT antenna
Reflector Diameter1.8 m
BandKu-band
Reflector GeometryOffset
Reflector MaterialSingle-piece compression moulded thermoset
Rear StructureClosely spaced integral rib structure for wind loading
MountSteel section, hot-dip galvanised
AdjustmentFine adjustment in both axes
HardwareImproved environmental resistance
StandardsMeets applicable ITU recommendations
Datasheet1.8-M-Ku-BAND-ANTENNA-SYSTEM.pdf

Typical Applications

  • Remote enterprise branch and camp connectivity
  • Oil, gas and mining field sites
  • Government and public safety field terminals
  • Broadcast contribution from fixed locations
  • Rural and community broadband hubs
  • Business continuity and network backup links

A Compact 1.8 m Ku-Band VSAT Antenna

At 1.8 m the Sumeru Ku-band antenna sits at the point where a VSAT terminal is still easy to handle but no longer small. The reflector is a single piece of compression moulded thermoset in an offset geometry, so there are no petal joints to align and nothing on the surface to corrode. Sumeru moulds a closely spaced rib structure into the back of the dish, which stiffens it against wind and keeps the parabolic surface true, the two things that decide whether the antenna keeps its gain in service. The mount is fabricated from steel section and hot-dip galvanised for extreme environments, with fine adjustment on both axes for alignment.

Where a 1.8 m Ku-Band Antenna Is the Right Size

Antenna sizing is a trade between gain and everything gain costs you. A 1.8 m Ku-band aperture is a practical middle ground: markedly more gain and rain margin than the small terminals used for basic connectivity, but light enough for a rooftop, a compound or a remote camp without heavy civil works. It suits enterprise branch sites that carry real traffic, remote industrial and mining locations, government field terminals and broadcast contribution links where the truck cannot bring a bigger dish. Before settling on 1.8 m, check the satellite's EIRP and G/T over the site, the availability figure your service level agreement demands and the rain statistics for the region. If any of those look marginal, step up to a 2.4 m antenna rather than fight the link budget later.

Mounting, Ribbing and Environmental Durability

Get the mount right and a 1.8 m Ku-band antenna will hold alignment for years. Set the hot-dip galvanised steel mount on a base sized to local wind code, plumb it carefully and let any concrete cure before loading it. Because the reflector arrives in one piece, there is no petal joint to true up, but the dish still has to be handled carefully: a moulded thermoset surface is durable rather than indestructible. Use the fine adjustment in both axes to peak receive signal, lock the assembly and re-check after the first weeks. Sumeru specifies hardware with improved environmental resistance, which matters in coastal Gulf air; even so, inspect fasteners, feed seals and cable entries on a regular maintenance cycle.

Buying the Sumeru 1.8 m Ku-Band Antenna from GCCSAT

GCCSAT is a UAE-based satellite communications integrator supplying antennas, BUCs, LNBs, modems and complete VSAT terminals across the GCC, the wider Middle East and Africa. We quote the Sumeru 1.8 m Ku-band antenna as part of a working terminal rather than as a box on its own, so the feed, RF chain and modem are specified to match. Our engineers can advise on mount and foundation for your site, prepare the paperwork your project or import process needs, and support installation, alignment and commissioning. Where one of Sumeru's other frequency bands would serve you better, we will tell you. Pricing is quoted on request; send us your requirement for a formal quotation.

Frequently Asked Questions

Is the Sumeru 1.8 m reflector supplied in one piece?

Yes. Sumeru lists a single-piece compression moulded thermoset offset reflector for the 1.8 m antenna, so there are no petals to align during assembly. Behind the reflecting surface the manufacturer moulds a closely spaced rib structure that strengthens the dish against wind loading and helps it hold the parabolic shape Ku-band performance depends on.

Is a 1.8 m antenna big enough for a Ku-band VSAT link?

For many services, yes. Whether it is enough for yours depends on the satellite beam over your site, the throughput you have contracted and the availability target in your service level agreement. A 1.8 m aperture gives useful rain margin over smaller terminals while staying easy to mount. If your link budget is tight, a 2.4 m antenna is the next practical step. GCCSAT can review the numbers with you.

Can the 1.8 m antenna be supplied in C-band or another frequency?

Sumeru states that other frequency bands are available on request, and GCCSAT also supplies the 1.8 m antenna in a C-band configuration. The mechanical design is closely related; the reflector specification, feed and RF chain change with the band. Base the choice on the satellite capacity you have contracted and the rain climate where the terminal will live.

How is the antenna protected against corrosion?

The reflector is compression moulded thermoset, a material that does not rust. The mount is fabricated from steel section and hot-dip galvanised, which Sumeru describes as giving extraordinary resistance to extreme environmental conditions, and the hardware is specified for improved environmental resistance. That combination suits humid, salt-laden coastal air, though regular inspection of fasteners and seals is still good practice.

Does GCCSAT supply Sumeru antennas outside the UAE?

Yes. GCCSAT supplies Sumeru antenna systems from the UAE across the GCC, the wider Middle East and Africa, handling export documentation and logistics coordination as part of the order. We can also support installation, alignment and commissioning, and specify the matching Ku-band RF chain. Contact our team with the destination, quantity and site details to start the enquiry.

Enquire About Sumeru 1.8 m Ku-Band Transmit-Receive Antenna System

Our sales team will provide pricing, availability, and shipping details.

Request a QuoteWhatsApp

More VSAT Fixed Antennas

WhatsAppHow can I help you?