Peplink Balance 710Peplink Products

Peplink Balance 710

The Peplink Balance 710 delivers carrier-grade multi-WAN routing and SD-WAN for large enterprises and ISPs requiring robust bandwidth management, advanced failover, and high availability. Its high throughput capacity handles the most demanding multi-site enterprise environments.

Key Features

  • Seven Gigabit Ethernet WAN ports plus USB WAN in a 1U rackmount chassis
  • Inbound and outbound load balancing across terrestrial and satellite circuits
  • SpeedFusion Hot Failover, WAN Smoothing and Bandwidth Bonding
  • High availability pairing for hot-standby redundancy
  • InControl 2 cloud management

Technical Specifications

WAN Interfaces7x Gigabit Ethernet WAN + USB WAN
Router ThroughputUp to 2.5 Gbps
HAHot standby failover
BondingSpeedFusion VPN bonding
Form Factor1U rackmount

Typical Applications

  • Large enterprise networks
  • ISP multi-WAN
  • Government network resilience
  • Data center SD-WAN

Seven WAN ports for multi-carrier, multi-orbit sites

The Peplink Balance 710 is built for sites that terminate many circuits at once: a data centre, a government facility, a large head office or an operations centre at an energy or mining site. Seven Gigabit Ethernet WAN ports let each fiber, MPLS, microwave, GEO VSAT, Starlink or OneWeb link arrive on its own port, and a USB WAN port can add a cellular modem. Outbound policies send each application over the most suitable link, while inbound load balancing spreads traffic to hosted services across several connections. The Balance 710 has no cellular modem or Wi-Fi radio of its own, which suits a 1U rack in a secured equipment room.

Hot-standby redundancy and SpeedFusion at the network core

A pair of Balance 710 units can run in high availability, with the standby router taking over if the active one fails, so a single hardware fault does not cut off every circuit behind it. The Balance 710 also supports SpeedFusion hot failover, WAN smoothing and bandwidth bonding, and can serve as the SpeedFusion peer for Peplink routers at branches, on vessels and in remote camps, giving their traffic a fixed exit point at the core. InControl 2 brings configuration, firmware and WAN health reporting into one cloud dashboard. GCCSAT, as an authorized Peplink partner, can configure the Balance 710 as the hub of an existing or expanding Peplink network.

Frequently Asked Questions

Does the Peplink Balance 710 include cellular or Wi-Fi?

No. The Balance 710 is a wired multi-WAN router without a cellular modem or Wi-Fi radio. Cellular can be added with a modem on its USB WAN port, or by connecting an external cellular router to one of its Ethernet WAN ports. Wi-Fi is normally provided by separate Peplink access points, which the Balance 710 can manage.

Is the Peplink Balance 710 still a current model?

Peplink currently lists the Balance 710 in its Enterprise Legacy range. It remains a capable router for sites that need many Gigabit WAN ports or already run Balance hardware. For new projects, compare it with Peplink's current Balance models on link count, throughput and SpeedFusion capacity before ordering, especially if the router will serve as a long-term hub.

What is the difference between load balancing and SpeedFusion bonding on the Balance 710?

Load balancing distributes separate sessions across WAN links, so each session still uses one link. SpeedFusion bonding splits traffic at packet level inside a tunnel to a SpeedFusion peer, so even a single large session can use the combined bandwidth. Load balancing needs no peer, while bonding needs a Peplink router, FusionHub or SpeedFusion Connect at the far end.

Related Services

Enquire About Peplink Balance 710

Our sales team will provide pricing, availability, and shipping details.

Request a QuoteWhatsApp
WhatsAppHow can I help you?