Teltonika TRB256Teltonika Products

Teltonika TRB256

The Teltonika TRB256 is a compact industrial LTE-M/NB-IoT gateway designed for low-power IoT applications, supporting both Cat-M1 and NB-IoT protocols for efficient remote connectivity. Its optimized power consumption enables battery-powered or solar-powered remote deployment.

Key Features

  • LTE Cat-M1 and NB-IoT gateway with EGPRS fallback
  • Ethernet, RS232, RS485 and configurable I/O on a terminal block
  • Modbus, MQTT, DNP3 and DLMS/COSEM for SCADA and metering
  • Aluminium housing rated for -40 °C to +75 °C
  • Managed via WebUI, SSH, SNMP and Teltonika RMS

Technical Specifications

CellularLTE Cat-M1 / NB-IoT, EGPRS fallback
Power ConsumptionUnder 2 W idle, under 3.5 W max
InterfacesEthernet, I/O, RS232, RS485
Operating Temperature-40°C to +75°C
ApplicationLow-power IoT / M2M

Typical Applications

  • Solar-powered telemetry sites
  • NB-IoT monitoring
  • Smart meter reading
  • Low-bandwidth M2M

LTE-M and NB-IoT for low-power telemetry

The Teltonika TRB256 is an industrial NB-IoT gateway built for small, regular data transfers: meter reads, tank levels, pump status, cathodic protection readings and alarms. It connects over LTE Cat-M1 or NB-IoT, the low-power cellular technologies designed for IoT, with EGPRS fallback where those networks are not available. Automatic switching between its SIM cards on weak signal, network loss or a data limit adds resilience. The gateway draws little power from a wide-range DC supply, which makes solar or battery-backed cabinets practical, and its aluminium housing is rated from -40 °C to +75 °C. It is designed for telemetry rather than video or office internet traffic.

Industrial protocols for SCADA, metering and satellite-connected sites

The TRB256 runs Teltonika's RutOS with a broad industrial protocol set. It can act as a Modbus RTU or TCP client or server, pass Modbus data to an MQTT broker, operate as a DNP3 station or outstation, read utility meters over DLMS/COSEM, route BACnet and serve OPC UA. Data to Server pushes readings to HTTP(S) or MQTT platforms, and OpenVPN, IPsec and WireGuard tunnels protect the traffic. At sites where a VSAT, Starlink or OneWeb terminal carries the main link, the TRB256 can keep alarms flowing over an independent cellular path. GCCSAT supplies, configures and supports the TRB256 within telemetry projects that also rely on satellite.

Frequently Asked Questions

Will the Teltonika TRB256 work in my country?

It depends on local networks. The TRB256 needs an operator offering LTE-M or NB-IoT on bands the gateway supports, with EGPRS as a fallback where those legacy networks still run. Coverage and band plans vary across the Middle East and Africa, so confirm LTE-M or NB-IoT availability with the operator for each site before deployment.

Can the TRB256 carry CCTV or a site's internet traffic?

No. LTE-M and NB-IoT are low-bandwidth technologies intended for telemetry, so the TRB256 is the wrong tool for video, file transfers or crew internet access. Use a full LTE or 5G router, or a satellite service such as VSAT, Starlink or OneWeb, for those workloads, and keep the TRB256 dedicated to monitoring and control data.

Can the TRB256 run from solar power?

It runs from an external DC supply across a wide voltage range and has a low power draw, which makes solar panels with battery storage a practical option at off-grid sites. Size the panel and battery for continuous operation through the worst season, and allow for any sensors or radios powered from the same supply.

Related Services

Enquire About Teltonika TRB256

Our sales team will provide pricing, availability, and shipping details.

Request a QuoteWhatsApp
WhatsAppHow can I help you?